Filter
Top Products
Chapter 15. Security Management | 273
ProSafe M4100 and M7100 Managed Switches
CLI: Create a Static Address
(Netgear Switch) (Interface 1/0/1)#port-security mac-address 00:13:00:01:02:03
Web Interface: Create a Static Address
1. Select Security > Traffic Control > Port Security > Static MAC address.
A screen similar to the following displays.
2. Under Port List, in the Interface list, select 1/0/1.
3. In the Static MAC
Address section of the screen, enter the following information:
• In the Static MAC
Address field, enter 00:13:00:01:02:03.
• In the Vlan ID list, select 3.
4. Click Add.
Protected Ports
This section describes how to set up protected ports on the switch. Some situations might
require that traffic is prevented from being forwarded between any ports at Layer 2 so that
one user cannot see the traffic of another user on the same switch. Protected ports can:
• Prevent traf
fic from being forwarded between protected ports.
• Allow traf
fic to be forwarded between a protected port and a non-protected port.