Filter
Top Products
320 | Chapter 16. SNTP
ProSafe M4100 and M7100 Managed Switches
command to confirm that the time has been received. The time will be used in all logging
messages.
(Netgear Switch) #show sntp server
Server IP Address: 208.14.208.19
Server Type: ipv4
Server Stratum: 4
Server Reference Id: NTP Srv: 208.14.208.3
Server Mode: Server
Server Maximum Entries: 3
Server Current Entries: 1
SNTP Servers
------------
IP Address: 208.14.208.19
Address Type: IPV4
Priority: 1
Version: 4
Port: 123
Last Update Time: Mar 26 03:36:09 2006
Last Attempt Time: Mar 26 03:36:09 2006
Last Update Status: Success
Total Unicast Requests: 2
Failed Unicast Requests: 0
Web Interface: Configure SNTP
1. Configure the SNTP server.
a. Select System > Management >T
ime > SNTP Server Configuration.
A screen similar to the following displays.
b. Enter the following information: