Filter
Top Products
552 | Chapter 33. iSCSI
ProSafe M4100 and M7100 Managed Switches
Enable iSCSI Awareness with VLAN Priority Tag
The example is shown as CLI commands and as Web interface procedure
CLI: Enable iSCSI Awareness with VLAN Priority Tag
Use the following commands to enable iSCSI awareness, select VPT, and set VLAN number
and aging time.
(Netgear Switch) #config
(Netgear Switch) (Config) #iscsi enable
(Netgear Switch) (Config) #iscsi cos vpt 5
(Netgear Switch) (Config) #iscsi aging time 10
(Netgear Switch) (Config) #exit
Web Interface: Enable iSCSI Awareness with VLAN Priority Tag
1. 1.Enable iSCSI awareness, select VPT, and set VLAN number and aging time.
a. Select Switching > iSCSI > Basic.
A screen similar to the following displays.
b. b.Enter the following information:
• "In the iSCSI Status, select Enable.
• "In the QoS Profile, select VLAN Priority Tag.
• "In the VLAN Priority
Tag, select 5 (default value).
• "In the remark, select Enable (default value).
• "In the iSCSI
Aging Time, enter 10 (default value).
c. Click Apply.