Filter
Top Products
Chapter 13. IGMP Snooping and Querier | 249
ProSafe M4100 and M7100 Managed Switches
Web Interface: Configure the Switch with an External Multicast
Router
1. Select Switching > Multicast > Multicast Router Configuration.
A screen similar to the following displays.
2. Under Multicast Router Configuration, scroll down and select the Interface 1/0/3 check box.
Now 1/0/3 appears in the Interface field at the top.
3. In the
Admin Mode field, select Enable.
4. Click Apply.
Multicast Router Using VLAN
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure the Switch with a Multicast Router Using VLAN
This example configures the interface to forward only the snooped IGMP packets that come
from VLAN ID (<VLAN Id>) to the multicast router attached to this interface.
(Netgear Switch)(Interface 1/0/3)# set igmp mrouter 2
Web Interface: Configure the Switch with a Multicast Router
Using VLAN
1. Select Switching > Multicast > Multicast Router VLAN Configuration.