Filter
Top Products
430 | Chapter 27. IPv6 Interface Configuration
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Under PVID Configuration, scroll down and select the Interface 1/0/1 check box.
c. In the PVID (1 to 4093) field, enter 500.
d. Click Apply to save the settings.
4. Enable IPv6 forwarding and unicast routing on the switch.
a. Select Routing > IPv6 > Basic > Global Configuration.
A screen similar to the following displays.
b. For IPv6 Unicast Routing, select the Enable radio button.
c. For IPv6 Forwarding, select the Enable radio button.
d. Click Apply.
5. Enable IPv6 routing on the VLAN.
a. Select Routing > IPv6 >
Advanced > Interface Configuration.