NETGEAR M7100 Switch User Manual


 
Chapter 15. Security Management | 277
ProSafe M4100 and M7100 Managed Switches
In the Type of Binding field, select Dynamic.
In the Network Number field, enter 192.168.1.0.
In the Network Mask field, enter 255.255.255.0.
In the Days field, enter 1.
Click Default Router
Addresses. The DNS server address fields display. In the
first Router Address field, enter 192.168.1.254.
Click DNS Server
Addresses. The router address fields display. In the first DNS
Server Address field, enter 12.7.210.170.
c. Click Add.
2. Configure a VLAN and include ports 1/0/23 and 1/0/24 in the VLAN:
a. Select Routing > VLAN > VLAN Routing W
izard.
A screen similar to the following displays.
b. Enter the following information:
In the Vlan ID field, enter 192.
In the IP Address field, enter 192.168.1.254.
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1.
The ports display:
Click the gray box under port 23 twice until U displays.
Click the gray box under port 24 twice until U displays.
The U specifies that the egress packet is untagged for the port.
d. Click Apply to save the VLAN that includes ports 23 and 24.
3. Configure a VLAN and include port 1/0/48 in the VLAN:
a. Select Routing > VLAN > VLAN Routing W
izard.