Filter
Top Products
502 | Chapter 29. DHCP L2 Relay and L3 Relay
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/15 check box.
c. In the IP Address
Configuration Method field, enter Manual.
d. In the IP Address field, enter 10.200.1.1.
e. In the Subnet Mask field, enter 255.255.255.0.
f. In the Routing Mode field, select Enable.
g. Click Apply to save the settings.
5. Create a routing interface and assign 10.200.2.1/24 to it.
a. Select Routing > IP >
Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Under IP Interface Configuration, scroll down and select the Port 1/0/16 check box.
c. In the IP
Address Configuration Method field, enter Manual.
d. In the IP
Address field, enter 10.200.2.1.
e. In the Subnet Mask field, enter 255.255.255.0.
f. In the Routing Mode field, select Enable.
g. Click Apply to save the settings.
6. Redistribute the connected routes to RIP
.
a. Select Routing > RIP >
Advanced > Route Redistribution.