Filter
Top Products
262 | Chapter 14. MVR (Multicast VLAN Registration)
ProSafe M4100 and M7100 Managed Switches
b. Under MVR Interface Configuration, scroll down and select the Interface 0/9 check
box.
c. Enter the following information:
• In the
Admin Mode list, select Enable.
• In the
Type list, select source.
d. Click Apply to save the settings.
7. Configure MVR Group Membership.
a. Select Switching > VLAN >
Advanced > VLAN Membership. A screen similar to the
following displays:
b. In the Group IP list, select 224.1.2.3.
c. Click Unit 1.
The ports display.
d. Click the gray boxes under ports 1, 5, and 7. (Port 9 is already in MVR group
224.1.2.3 because it is configured as the source port.)
e. Click Apply to save the settings.