Using the BayStack 350 10/100/1000 Series Switch
3-20
304376-B Rev 00
VLAN Configuration Menu
The VLAN Configuration Menu screen (Figure 3-8) allows you to select the
appropriate screen to configure up to 64 port-based VLANs. When you create
VLANs, you can assign various ports (and therefore the devices attached to these
ports) to different broadcast domains. Creating VLANs increases network
flexibility by allowing you to reassign devices to accommodate network moves,
additions, and changes, eliminating the need to change physical cabling.
See “IEEE 802.1Q VLAN Workgroups” on page 1-18, for detailed information
about configuring VLANs.
Choose VLAN Configuration (or press v) from the Switch Configuration Menu
screen to open the VLAN Configuration Menu.
Port Mirroring Address A
This field only appears when any of the five
address-based
monitoring
modes are selected from the Port Mirroring Configuration screen. When you
enter a MAC address in this field, it is also configured into the Port Mirroring
Configuration screen. Conversely, when you enter the MAC address from the
Port Mirroring Configuration screen, it also displays in this screen. See “Port
Mirroring Configuration” on page 3-41 for more information.
Default Value: 00-00-00-00-00-00 (no MAC address assigned)
Range: 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Port Mirroring Address B
This field only appears when any of the two
address-based
monitoring
modes that use Address B are selected from the Port Mirroring Configuration
screen. When you enter a MAC address in this field, it is also configured into
the Port Mirroring Configuration screen. Conversely, when you enter the MAC
address from the Port Mirroring Configuration screen, it also displays in this
screen. See “Port Mirroring Configuration
” on page 3-41 for more
information.
Default Value: 00-00-00-00-00-00 (no MAC address assigned)
Range: 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Table 3-6. MAC Address Table Screen Fields (continued)
Field Description
kombk.book Page 20 Thursday, February 18, 1999 10:59 AM
