Filter
Top Products
Using the Console Interface
309979-A Rev 00
3-35
Figure 3-14. Port Configuration Screen (2 of 2)
Table 3-14 describes the
Port Configuration screen fields.
Note:
When a gigabit MDA is installed, only the Status field for that MDA
port is configurable. See “
High Speed Flow Control Configuration” on
page 3-36
to set the autonegotiation field for the gigabit MDA port. The
gigabit MDA only supports 1000 Mb/s in full-duplex mode.
Table 3-14. Port Configuration Screen Fields
Field Description
Port
Indicates the switch port numbers that correspond to the field values in that row of
the screen (for example, the field values in row 2 apply to switch port 2). The values
that you set in the
Switch
row will affect all switch ports (except the gigabit MDA ports
or fiber optic ports, when installed).
(continued)
Port Configuration
Port Trunk Status Link LnkTrap Autonegotiation Speed Duplex
---- ----- ------------ ----- ------- --------------- -----------------
15 [ Enabled ] Down [ Off ] [ Disabled ] [ 10Mbs / Full ]
16 [ Enabled ] Down [ Off ] [ Disabled ] [ 10Mbs / Full ]
17 1 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
18 [ Enabled ] Down [ On ] [ Disabled ] [ 100Mbs / Half ]
19 3 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
20 3 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
21 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Half ]
22 4 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
23 4 [ Enabled ] Up [ On ] [ Enabled ] [ 100Mbs / Full ]
24 [ Enabled ] Down [ On ] [ Disabled ] [ 10Mbs / Half ]
25 [ Enabled ] Up [ Off ] [ Enabled ] [ 100Mbs / Half ]
26 [ Enabled ] Up [ Off ] [ Disabled ] [ 100Mbs / Half ]
27 [ Enabled ] Down [ Off ] [ Disabled ] [ 100Mbs / Half ]
28 [ Enabled ] Down [ On ] [ Disabled ] [ 100Mbs / Half ]
Switch [ Enable ] [ On ] [ Enabled ] [ 100Mbs / Half ]
Press Ctrl-P to display choices for ports 1-14.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.