Using the Console Interface
304376-B Rev 00
3-31
Figure 3-14. Port Configuration Screen (2 of 2)
Table 3-12 describes the
Port Configuration screen fields.
Note:
When a gigabit MDA is installed, only the Status field for that MDA
port is configurable. See “
High Speed Flow Control Configuration” on
page 3-32
to set the autonegotiation field for the gigabit MDA port. The
gigabit MDA only supports 1000 Mb/s in full-duplex mode.
Table 3-12. Port Configuration Screen Fields
Field Description
Port
Indicates the switch port numbers that correspond to the field settings in that row of
the screen (for example, the field settings in row 2 apply to switch port 2). Note that
the settings applied in the All row (bottom row) affect all switch ports (except the
gigabit MDA port, when installed).
(continued)
Port Configuration
Port Trunk Status Link Auto Negotiation Speed Duplex
---- ----- ------------ ---- ---------------- -----------------
15 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
16 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
17 1 [ Enabled ] Up [ Disabled ] [ 100Mbs / Half ]
18 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
19 3 [ Enabled ] Up [ Disabled ] [ 100Mbs / Half ]
20 3 [ Enabled ] UP [ Disabled ] [ 100Mbs / Half ]
21 [ Enabled ] Down [ Disabled ] [ 100Mbs / Half ]
22 4 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
23 4 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
24 [ Enabled ] Down [ Enabled ] [ 100Mbs / Full ]
25 1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
26 1 [ Enabled ] Up [ Enabled ] [ 100Mbs / Full ]
27 [ Enabled ] Down [ Disabled ] [ 10Mbs / Full ]
28 [ Enabled ] Down [ Disabled ] [ 10Mbs / Full ]
All [ Enabled ] [ Disabled ] [ 10Mbs / Full ]
Press Ctrl-P to display choices for ports 1-14.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 31 Thursday, February 18, 1999 10:59 AM
