Filter
Top Products
Using the BayStack 350 10/100/1000 Series Switch
3-20
309979-A Rev 00
VLAN Configuration Menu
The VLAN Configuration Menu screen (Figure 3-8) allows you to select the
appropriate screen to configure up to 64 VLANs (VLAN 1 is port-based, by
default). You can configure as many as 63 protocol-based VLANs, with up to 15
different protocols. The number of different protocols you can configure depends
on the number of hexidecimal values (PID values) associated with the protocol
type (some protocol types use more than one PID value, see Table 3-9
on
page 3-26
).
When you create VLANs, you can assign various ports (and therefore the devices
attached to these ports) to different broadcast domains. Creating VLANs increases
network flexibility by allowing you to reassign devices to accommodate network
moves, additions, and changes, eliminating the need to change physical cabling.
See “IEEE 802.1Q VLAN Workgroups” on page 1-20 for detailed information
about configuring VLANs.
Choose VLAN Configuration (or press v) from the Switch Configuration Menu
screen to open the VLAN Configuration Menu.
Port Mirroring Address A
Only appears when you select any of the five
address-based
monitoring
modes from the Port Mirroring Configuration screen. When you enter a MAC
address in this field, it is also configured into the Port Mirroring Configuration
screen. Conversely, when you enter the MAC address from the Port Mirroring
Configuration screen, it also appears in this screen. See “Port Mirroring
Configuration” on page 3-45 for more information.
Default Value: 00-00-00-00-00-00 (no MAC address assigned)
Range: 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Port Mirroring Address B
Only appears when you select any of the two
address-based
monitoring
modes that use Address B from the Port Mirroring Configuration screen.
When you enter a MAC address in this field, it is also configured into the Port
Mirroring Configuration screen. Conversely, when you enter the MAC
address from the Port Mirroring Configuration screen, it also appears in this
screen. See “Port Mirroring Configuration
” on page 3-45 for more
information.
Default Value: 00-00-00-00-00-00 (no MAC address assigned)
Range: 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Table 3-6. MAC Address Table Screen Fields
(continued)
Field Description