Using the Console Interface
304376-B Rev 00
3-33
Figure 3-15. High Speed Flow Control Configuration Screen
Table 3-13 describes the High Speed Flow Control Configuration screen fields.
Table 3-13. High Speed Flow Control Configuration Screen Fields
Field Description
Autonegotiation
When enabled, the port advertises support for 1000 Mb/s operation, in
full-duplex mode.
Default Value: Enabled
Range: Enabled, Disabled
Flow Control
Allows you to control traffic and avoid congestion on the gigabit MDA port. Two
modes are available (see “
Choosing a High Speed Flow Control Mode” on
page 3-34
for details about the two modes). Autonegotiation must be disabled
for this port when using this feature.
Default Value: Disabled
Range: Disabled, Symmetric, Asymmetric
(continued)
High Speed Flow Control Configuration
Autonegotiation: [ Enabled ]
Flow Control: [ Disabled ]
Preferred Phy [ Right ]
Active Phy None
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 33 Thursday, February 18, 1999 10:59 AM
