Filter
Top Products
Using the BayStack 350 10/100/1000 Series Switch
3-84
309979-A Rev 00
Configuration File
The Configuration File Download/Upload screen (Figure 3-35) allows you to
store your switch configuration parameters on a TFTP server.
You can retrieve the configuration parameters and use the retrieved parameters to
automatically configure a replacement switch or a group of switches if required.
Certain requirements apply when automatically configuring a switch using this
feature (see “
Requirements” on page 3-85). You must set up the file on your TFTP
server and set the file name read/write permission to Enabled before you can save
the configuration parameters.
Choose Configuration File (or press g) from the main menu to open the
Configuration File Download/Upload screen.
Figure 3-35. Configuration File Download/Upload Screen
Table 3-33 describes the Configuration File Download/Upload screen fields.
Configuration File Download/Upload
Configuration Image Filename: [ ]
TFTP Server IP Address: [ 132.245.164.4 ]
Copy Configuration Image to Server: [ No ]
Retrieve Configuration Image from Server: [ No ]
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.