Filter
Top Products
Using the Console Interface
309979-A Rev 00
3-95
Logout
The Logout option (accessed from the main menu) allows you to terminate the
session from a password-protected console terminal or from an active TELNET
session.
The Logout option works as follows:
• If you are accessing the BayStack 350 switch through a TELNET session, the
Logout option terminates the TELNET session.
• If you are accessing the BayStack 350 switch through a password-protected
console terminal (connected to the console/comm port on the switch), the
Logout option displays the console-terminal password prompt (Figure 3-44
).
If RADIUS authentication is enabled, the password field is preceded by a
username field. You must enter the correct password (and username, if
applicable) to access the CI screens.
Figure 3-44. Password Prompt Screen
You can specify whether a password is required for the TELNET session or the
console terminal using the Console/Comm Port Configuration screen (see
“
Hardware Unit Information” on page 3-68).
If the console terminal is not password protected, the system ignores the Logout
option.
BayStack Model 350-24T HW:Rev
x
FW:V
x
.
xx
SW:V
x.x.x.x
Password: [ *************** ]
Enter Password: