Using the BayStack 350 10/100/1000 Series Switch
3-80
309979-A Rev 00
Software Download
The Software Download screen (Figure 3-34) allows you to revise the BayStack
350 switch software image that is located in nonvolatile flash memory.
To download the BayStack 350 switch software image, a properly configured
Trivial File Transfer Protocol (TFTP) server must be present in your network, and
the switch must have an IP address. (See “IP Configuration” on page 3-7
to learn
how to configure the switch’s IP address.)
You can monitor the software download process by observing the BayStack 350
switch LEDs (see “
LED Indications During the Download Process” on
page 3-82
).
Caution:
Do not interrupt power to the device during the software download
process. If the power is interrupted, the firmware image can become corrupted.
Achtung:
Unterbrechen Sie die Stromzufuhr zum Gerät nicht, während die
Software heruntergeladen wird. Bei Unterbrechung der Stromzufuhr kann das
Firmware-Image beschädigt werden.
Attention:
Ne pas couper l'alimentation de l'appareil pendant le chargement
du logiciel. En cas d'interruption, le programme résident peut être endommagé.
Precaución
:
No interrumpa la alimentación del dispositivo durante el
proceso de descarga del software. Si lo hace, puede alterar la imagen de la
programación (firmware).
Attenzione:
Non interrompere l'alimentazione elettrica al dispositivo durante
il processo di scaricamento del software. In caso di interruzione, l'immagine
firmware potrebbe danneggiarsi.