Filter
Top Products
Using the Console Interface
309979-A Rev 00
3-37
Choose High Speed Flow Control Configuration (or press h) from the Switch
Configuration Menu to open the High Speed Flow Control Configuration screen.
Figure 3-15. High Speed Flow Control Configuration Screen
Table 3-15 describes the High Speed Flow Control Configuration screen fields.
Table 3-15. High Speed Flow Control Configuration Screen Fields
Field Description
Autonegotiation
Allows the port to advertise support for 1000 Mb/s full-duplex operation.
Default Value: Enabled
Range: Enabled, Disabled
Flow Control
Allows you to control traffic and avoid congestion on the gigabit MDA port. Two
modes are available (see “
Choosing a High Speed Flow Control Mode” on
page 3-38
for details about the two modes). The Flow Control field cannot be
configured unless you set the Autonegotiation field value to Disabled.
Default Value: Disabled
Range: Disabled, Symmetric, Asymmetric
(continued)
High Speed Flow Control Configuration
Autonegotiation: [ Enabled ]
Flow Control: Disabled
Preferred Phy: [ Right ]
Active Phy: Right
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.