Using the Console Interface
304376-B Rev 00
3-25
Table 3-9 describes the VLAN Port Configuration screen fields.
Table 3-9. VLAN Port Configuration Screen Fields
Field Description
Port
Allows you to select the number of the port you want to view or
configure. To view another port, type its port number and press Enter, or
press the spacebar on your keyboard to toggle the port numbers.
Filter Tagged Frames
Allows you to set this port to filter (discard) all received tagged packets.
Default Value: No
Range: No, Yes
Filter Untagged Frames
Allows you to set this port to filter (discard) all received untagged
packets.
Default Value: No
Range: No, Yes
Filter Unregistered Frames
Allows you to set this port to filter (discard) all received unregistered
packets.
Default Value: No
Range: No, Yes
Port Name
Allows you to assign a name to this port.
Default Value: Port # (
port number
)
Range: Any ASCII string of up to 16 printable characters
PVID
Port VLAN identifier field. Allows you to associate this port with a specific
VLAN. For example, a port with a PVID of 3 assigns all untagged frames
received on this port to VLAN 3.
Default Value: 1
Range: 1 to 4094
Port Priority
Allows you to prioritize the order in which the switch forwards packets
received on specified ports (see “IEEE 802.1p Prioritizing” on
page 1-39).
Default Value: 0
Range: 0 to 7
Note:
The following fields only appear when the port (selected in the
Port field) is configured with an optional gigabit MDA.
(continued)
kombk.book Page 25 Thursday, February 18, 1999 10:59 AM
