Filter
Top Products
Default Settings
309979-A Rev 00
F-3
High Speed Flow Control Configuration
(page 3-36)
Autonegotiation Enabled
Flow Control Disabled
Note:
The following two fields only appear when a single Phy
MDA with a separate redundant Phy port is installed.
Preferred Phy Right
Active Phy Read-only field indicating the
operational Phy port (Right, Left,
or None)
MultiLink Trunk Configuration
(page 3-39)
Trunk Members Zero-length string
STP Normal
Trunk Mode Basic
Trunk Status Enabled
Trunk Name Trunk #1 to Trunk #6
MultiLink Trunk Utilization (page 3-43) Traffic Type Rx and Tx
Port Mirroring Configuration (page 3-45) Monitoring Mode Disabled
Monitor Port Zero-length string
Port X Zero-length string
Port Y Zero-length string
Address A 00-00-00-00-00-00
(no MAC address assigned)
Address B 00-00-00-00-00-00
(no MAC address assigned)
Rate Limiting Configuration (page 3-49) Packet Type Both
Limit None
IGMP Configuration Menu (page 3-52) VLAN 1
Snooping Enabled
Proxy Enabled
Robust Value 2
(continued)
Table F-1. Factory Default Settings for the BayStack 350 Switch
(continued)
Appears in this CI screen: Field: Default setting: