Filter
Top Products
103
1. Press the RESET button while holding down the SHIFT
button.
2. The monitor, the LED display and the indicator will
change as follows:
"ALARMnn" will disappear from the monitor.
The LED display will return to the state before the
alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the
alarm input.
■ Suspending the Alarm Inputs
Use this function when you do not want to be disturbed by
an alarm input, for example, during the setup procedures.
1. Press the ACK/SUSPEND button while holding down
the SHIFT button.
"ALM SUSPENDED" will appear on the monitor.
2. To cancel alarm suspension, press the ACK/SUSPEND
button while holding down the SHIFT button again.
"ALM SUSPENDED" will disappear from the monitor.
Notes:
• An alarm continues to operate even after it is suspend-
ed.
•
If you suspend an alarm while an alarm image is dis-
played, "ALM SUSPENDED" will not appear on the moni-
tor. Reset the alarm, and then suspend it
again.
■ Resetting the Alarm Inputs
There are two alarm reset functions:
• Alarm reset (resetting the alarm inputs according to the
input order)
• Alarm all reset (resetting all the alarm inputs)
● Alarm Reset
1. Select a monitor which displays "ALARM".
2. When more than one alarm signal has been input, the
second earliest alarm image appears on the monitor,
after the current alarm image is reset.
3. To reset all the alarms, repeat steps 1 and 2. The moni-
tor, the LED display and the indicator will change as fol-
lows:
"ALARMnn" will disappear from the monitor.
The LED display will return to the state before the
alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the
alarm input.
Note: When more than one alarm is input and they are
associated with the same monitor, they will be reset one
by one.
● Alarm All Reset
T&D CAM ID EVENT
AUX1 ONAUX1 OFF
STILL
ALL RESET
RESET
TOUR SEQ
Alarm
input 1
Alarm
input 5
Alarm
input 2
• Description about alarm reset
Monitor 1
Matrix switcher
ALARM01*
ALARM05*
ALARM02
ALL RESET
RESET
ALL RESET
RESET
Monitor 1
Time
SHIFT
PAUSE
NEXT
PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
ALL RESET
RESET
TOUR SEQ
MON LOCK
DEF
O
MON (ESC)
T&D CAM
MON STATUS
AL
L
ALM H VLD
MULTI SCRE
SEQUENCE
AUX2
O
EL-ZOOM
AUX1
O
STILL
SHIFT
REW/FF
STEP
GROUP SEQ
PAUSE
SUSPEND ALL RESET
ACK RESET
TOUR SEQ
PREV NEXT
OSD
PLAY PAUSE
ALM SUSPENDED