Panasonic WJ-SX 150 Network Router User Manual


 
66
In addition, the main window has the following buttons.
(File Open):
Select Setup Data File window (p. 84)
(Account Manager):
Account Manager window (p. 85)
(Communication Port):
Communication Port window (p. 86)
(Panasonic):
Opens the version information window of WJ-
SX150 Administrator Console. Clicking on "OK"
button will close the window.
Notes:
To reflect each configuration to the system, save the file
by pressing the SAVE button before closing the win-
dow. After that, be sure to put the file from the PC to
the unit.
When “No” is selected for Built in Multiplexer board in
the Recorder (refer to p. 66) window, you can open nei-
ther the Multiplexer Mode nor the Multiplexer Title win-
dow. Instead, a message window will appear and ask
you to select “Yes”. When the Multiplexer board is
installed in the unit, select “Yes”.
Recorder
This window configures the recorder setting parameters:
whether the multiplexer board is installed in the unit, what is
the type of the recorder, what is the recorder unit address,
and whether the gen-lock is activated.
How to Display
To display this window, click on the (Recorder Mode)
button in the main window (p. 65).
Parameters
Built in multiplexer board: Click on the desired radio but-
ton.
Yes: Select this when the multiplexer board is installed in
the unit. If you select this, you can configure the
Multiplexer Mode window. (Refer to p. 82.)
No: Select this when the multiplexer board is not installed in
the unit.
The factory default setting is “No”.
RECORDER
(Recorder Control):
Recorder window (p. 66)
MANAGEMENT
(Put to SX150):
Put a File to SX150 window (p. 67)
(Get from SX150):
Get a Configuration Data from SX150 window
(p. 68)
SEQUENCE
(Tour Sequence): Tour Sequence window
(p. 68)
(Group Sequence): Group Sequence window
(p. 69)
SCHEDULE
(Timer Event):
Timer Event window (p. 70)
(Camera Cleaning):
Camera Cleaning window (p. 71)
(Daylight Saving Time/Summer Time):
Daylight Saving Time/Summer Time window
(p. 71)
ALARM
(Alarm Mode):
Alarm Mode window (p. 72)
(Alarm Event):
Alarm Event window (p. 74)
(Alarm Port):
Alarm Port window (p. 74)
OPERATOR
(Operator Registration):
Operator Registration window (p. 75)
(Level Table):
Level Table window (p. 76)
(Monitor Selection):
Monitor Selection window (p. 76)
(Auto Login/Logout):
Auto Login/Logout window (p. 77)
SYSTEM
(Time & Date):
Time & Date window (p. 77)
(Cable Compensation/VD2/DATA):
Cable Compensation/VD2/DATA window (p. 78)
(Camera Title):
Camera Title window (p. 79)
(Data Port):
Data Port window (p. 81)
MULTIPLEXER
(Multiplexer Mode):
Multiplexer Mode window (p. 82)
(Multiplexer Title):
Multiplexer Title window (p. 84)