Panasonic WJ-SX 150 Network Router User Manual


 
29
SETUP
SHIFT
REW/FF
STEP
AUTO FOCUS
OPERATE LINK ALARM BUSY PROHIBITED
CALL
PRESET
PROGRAM
PRESET
IRIS
CLOSE OPEN
NEAR FAR
WIDE TELE
FOCUS
ZOOM
AUTO IRIS
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUP
ALL RESET
ACK RESET
F2
TOUR SEQ
PREV NEXT
STOP
OSD
AUTO PAN
MONITOR CAMERA
For Matrix Switcher (WJ-SX150)
WV
-
CU CJ
360
System Controller
RECORDER
INDEX
STOP PLAY
REC
PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
%3 %8 %9 ^0 ^1%4 %5 %6 %7
&3
&4
*4
*7 *3 *6
^3&0
&1&2*5*2 ^8^9 ^7 ^6 ^5^4
&5
&6
&8
&7
*1
*0
&9
^2
WV-CU360CJ System Controller (TERMINAL MODE)
A template, on which “For Matrix Switcher (WJ-SX150)” is written, is provided with System Controller WV-CU360CJ. When
using the template, place it on the surface of the controller.
%3 Operation indicator (OPERATE)
Lights up when the controller's power is turned on.
%4 Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
%5 Alarm indicator (ALARM)
Lights up when an alarm condition exists.
%6 Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
%7 LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
%8 Camera indicator (CAMERA)
Lights up when the camera number appears on the
LED display.
%9 Busy indicator (BUSY)
Lights up when the higher-priority operator selects the
camera or monitor you are currently operating.
Operations from the system controller are disabled until
this indicator goes off.
^0 Prohibited indicator (PROHIBITED)
Blinks when an operator attempts to control a monitor
(or camera) that is already used by a higher-priority
operator or the operator has done the prohibited opera-
tion.
^1 Zoom wheel controller
This control is used for zooming cameras equipped
with the specific lens. Moving the control to the right will
zoom in the image. Moving the control to the left will
zoom out the image.