Filter
Top Products
137 137
Transmission command toggles zoom.
mm=Monitor No.
n=0 Zoom OFF
n=1 + mark display ON
n=2 Two-fold zoom
n=4 x4Live image/Playback image
n=8 x8Live image/Playback image
CMD:RmmZM
Multiscreen segment switch-
ing
Recorder Control
Item
Transmission Command
(ASCII)
Response (ASCII) Parameter (ASCII)
CMD:RmmML ANS:RmmML mm=Monitor No.
Electronic Zoom ANS:RmmZMn
Play CMD:RmmPL ANS:RmmPL mm=Monitor No.
Pause CMD:RmmPA ANS:RmmPA mm=Monitor No.
Stop CMD:RmmSPn ANS:RmmSPn mm=Monitor No.
n=0 Stop playback
n=1 Stop recording
Recorder button CMD:HmmRS ANS:HmmRS Playback images of HD500 Series appear on
the monitor. (Recorder mode)
To cancel the recorder mode, enter the STOP
command, then Camera Selection command.
(Refer to p. 107).
Live/Playback image CMD:RmmVS ANS:RmmVSn Necessary when using a non-Panasonic
recorder with the Multiplexer board.
Transmission command changes the monitor
display between live and playback image.
n=0 Live image
n=1 Playback image