Filter
Top Products
79
■ Camera Title
This window configures the title for each camera.
Up to 20 characters (camera title + alphanumeric charac-
ters) are available for the title.
WJ-SX150 Administrator Console has the following built-in
characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789!"#$%&'()*+,–./:;
,=/?•_ÄÜÖÆÑÂØäüöæñâøÁÇÉÌÒÙßàáâçèéêëìíîïòóôùúû
In addition, symbols, special characters and original char-
acters are editable in the bitmap font.
● How to Display
To display this window, click on the (Camera Title)
button in the main window (p. 65).
● Parameters
• Fixed Font Box
The fixed-font characters are displayed here.
SPACE: To make a space in the text-box area, click on
this button.
• User Font Box
The character displayed here is editable by users.
Edit Font: To display the Edit Font window, click on this
button.
• Insert / Revise Radio button
To insert a character in the text-box area, click on the Insert
button. To revise the character there, click on the Revise
button.
(Save Exit) button
Saves the configuration and closes the Camera Title win-
dow.
Note: Be sure to click on this button after editing user font
characters. Otherwise, the edited characters will be
canceled.
(Cancel Exit) button
Cancels the configuration and closes the Camera Title win-
dow.
● Edit Camera Title
1. Click on the tab of the desired camera to edit its cam-
era title. The cursor blinks at the first block in the text
box.
Note: When the desired camera's tab does not appear,
click on the buttons A or B beside the tabs.
2. Click on the <– or –> button to move the cursor to the
desired position.
3. Click on the desired character button in the Fixed Font
or User Font box. The character will be entered in the
text box.
4. Repeat steps 2 and 3 to enter the camera title.
5. After the entry, click on the (Save Exit) button.
The camera title will be saved.
To Enter a Space in the Text Box
1. Click on the <– or –> button to move the cursor to the
desired position.
2. Click on the SPACE button.
To Delete a Character in the Text Box
1. Click on the Revise button.
2. Click on the <– or –> button and move the cursor to the
character for deletion.
3. Click on the DEL button.
The character will be deleted from the text box.
To Revise a Character in the Text Box
1. Click on the Revise button.
2. Click on the <– or –> button and move the cursor to the
character for revision.
3. Click on the desired character.
The character will be entered in the text box.
To Insert a Character in the Text Box
1. Click on the Insert button.
2. Click on the <– or –> button and move the cursor to the
block to enter a character.
3. Click on the SPACE button to enter a space.
4. Click on the Revise button.
5. Click on the desired character in the text box.
The character will be inserted in the text box.
To Cancel the Entry
Click on the (Cancel Exit) button.
The entry will be canceled and the Camera Title window will
close.
Camera title
input area