Filter
Top Products
36
Notes:
• Before connecting a terminal-mode system controller to the DATA 4 port, configure the system through SETUP MENU or
WJ-SX150 Administrator Console.
• If an optional network board is installed inside the recorder and you are to control it from LAN (local area network) or the
Internet, refer to a service manual procurable in your area.
● Connection with Digital Disk Recorder WJ-HD100 Series or Time-lapse VCR
• With the multiplexer board, the recorded images of Camera 1 to 16 can be multiplexed to Digital Disk Recorder, WJ-
HD100 Series or a time-lapse VCR.
Digital Disk Recorder WJ-HD100A or Time-Lapse VCR
Camera
16
Camera
1
Camera
2
Camera
3
Max. 16
Camera Inputs
16 Alarm Inputs
Multiplexer Board
WJ-SXB151
Max. 4 System Controllers 4 Monitor Outputs
Available for surveillance or playback of the camera images
WJ-SX150 Matrix Switcher
Matrix Switcher WJ-SX
OPERATE
NEXT
For Matrix Switcher (WJ-SX150)
WV
-
CU C
360
System Controller
NEXT
For Matrix Switcher (WJ-SX150)
WV
-
CU C
360
System Controller
NEXT
For Matrix Switcher (WJ-SX150)
WV
-
CU C
360
System Controller
NEXT
For Matrix Switcher (WJ-SX150)
WV
-
CU C
360
System Controller
OPERATE LED WILL BLINK
IF COOLING FAN MALFUNCTIONS
To use WJ-HD100 Series or a time-lapse VCR as a recorder, you need to install a multiplexer board inside the matrix
switcher.