Filter
Top Products
95
■ Patrol Learn and Play
A routine of manual operations can be stored for a specific
time and later reproduced repetitively.
1. Select the desired monitor and camera. (Refer to p. 90
Monitor Selection and p. 91 Camera Selection.)
2. Press the AUTO PAN button three times while holding
down the SHIFT button.
"LEARN" will appear on the LED display of the controller
as shown in the figure.
■ Changing to Black and White Images
This function gets the clear camera images on the monitor
while shooting the objects under low light conditions.
1. Select the desired monitor and camera. (Refer to p. 90
Monitor Selection and p. 91 Camera Selection.)
2. Press the AUTO PAN button two times while holding
down the SHIFT button.
"BLACK (black)" will appear on the LED display of the
controller as shown in the figure.
3. Press the button 1 to change the image from the color
mode to the black and white mode on the active moni-
tor.
"BL ON (BLACK ON)" appears on the LED display to
indicate the selected mode.
4. Press the button 2 to change the black and white image
to the color image on the active monitor.
"BL OF (BLACK OFF)" appears on the LED display to
indicate the selected mode.
5. Press the MON (ESC) button to exit from the mode.
Note: When the black and white parameter is set to
AUTO in the camera's SETUP MENU, this function
is disabled.
SETUP
SHIFT
REW/FF
STEP
CALL
PRESET
PROGRAM
PRESET
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUP
ALL RESET
ACK RESET
F2
TOUR SEQ
PREV NEXT
STOP
OSD
AUTO PAN
RECORDER
INDEX
STOP PLAY PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
SETUP
SHIFT
REW/FF
STEP
CALL
PRESET
PROGRAM
PRESET
GROUP SEQ
PAUSE
SUSPEND
F1
CAM SETUP
ALL RESET
ACK RESET
F2
TOUR SEQ
PREV NEXT
STOP
OSD
AUTO PAN
RECORDER
INDEX
STOP PLAY PAUSE
CAM FUNC
CLEAR
LOG OUT
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
3. To save the patrol sequence, follow the procedure
below.
q Press the button 2, then press the CAM (SET) but-
ton.
"LE R" appears on the LED display.
w Operate the camera manually.
e Press the button 3.
The operation data is saved and "LE S" appears on
the LED display.
4. To reproduce the operation data, follow the procedure
below.
q Press the button 1.
"LE P" appears on the LED display.
w Press the button 3.
The reproduction is ended.
5. To exit from the mode, press the MON (ESC) button.