Panasonic WJ-SX 150 Network Router User Manual


 
120
WJ-HD100 SERIES CONTROL (TERMINAL MODE)
Digital Disk Recorder WJ-HD100 Series are operable with
the system controller, while connecting to the matrix switch-
er.
Note: Before the use, it is necessary to install the multi-
plexer board in the matrix switcher, connect the
matrix switcher to the digital disk recorder, and con-
figure the system through WJ-SX150 Administrator
Console, OSD SETUP MENU, and WJ-HD100 Series
SETUP MENU. [Refer to p. 34 Installing the
Multiplexer Board, p.44 Connection with Digital Disk
Recorder WJ-HD100 Series, p. 52 WJ-SX150
SETUP MENU (OSD), p. 64 WJ-SX150 ADMINIS-
TRATOR CONSOLE, and Displaying WJ-HD100
Series SETUP MENU in this page.]
The following is the procedure of WJ-HD100 Series SETUP
MENU.
The following functions and buttons are valid in SETUP
MENU.
Joystick to R (B): Decrements a parameter
Joystick to L (A): Increments a parameter
Displaying WJ-HD100 Series SETUP
MENU
The operations are the same as WJ-HD500 Series.
Refer to p.116 Displaying WJ-HD500 Series SETUP MENU.
Controlling Digital Disk Recorder WJ-
HD100 Series
The following are the operating procedures of WJ-HD100
Series via the system controller.
Multiscreen Segment Switching
The operating procedure is the same as WJ-HD500 Series.
(Refer to p118)
Note: 7-, 10-, or 13-segment multiscreen display is
unavailable.
Manual Recording
The operations are the same as WJ-HD500 Series.
Refer to p. xx.
Normal Playback
Monitor display can be divided into 4, 9, or 16 multiscreen
segments to display camera images.
1. Select the desired monitor and camera. (Refer to p. 90
Monitor Selection and p. 91 Camera Selection.)
The monitor number and camera number will appear on
the LED display.
2. Press the RECORDER button on the system controller.
The system will enter the recorder mode and the
RECORDER indicator beside the button will light up.
2. To start the playback, press the PLAY button.
3. To pause the playback, press the PAUSE button.
4. To resume the playback, press the PLAY button.
5. To stop the playback, press the STOP button.
Note: Refer to WJ-HD100 Series Operating Instructions
for details and other playback modes.
Forward or Backward Search
The recorded images can be searched at variable speeds.
This function is available during the playback or playback
pause. (Refer to Normal Playback in the previous page.)
Move the joystick rightward or leftward to search images.
Joystick to R(B): Search forward
Joystick to L(A): Search backward
The joystick inclination can control the forward/backward
search speed.
Forward or Backward Field Advance
The recorded images can be searched field by field.
During the pause, move the joystick rightward or leftward to
advance an image field by field.
Joystick to R(B): Forward field advance
Joystick to L(A): Backward field advance
Search Playback
You can search playback images using the ALARM
RECALL table or the SEARCH table.
Every time you press the INDEX button, the display will
change as follows.
Live image ALARM RECALL table Date-and-time
entry form Live image
The operations are the same as WJ-HD500 Series.
Refer to p. 118 Search Playback.