Filter
Top Products
90
■ Priority Lock
● Applying Priority Lock
1. Select the desired monitor. (Refer to Monitor Selection).
2. Press the MON (ESC) button while holding down the
SHIFT button to toggle the priority lock mode on and off
on the active monitor.
If the priority lock mode is selected, the monitor number
will inversely appear on the active monitor as shown in
the figure.
Note: This function will prevent operators with lower priority
from gaining control of a monitor.
However, higher or equal priority operators may still
gain control of the monitor.
M04
SHIFT
PAUSE
TOUR SEQ
NEXT
PAUSE
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
● Releasing Priority Lock
1. Select the desired monitor. (Refer to Monitor Selection.)
2. Press the MON (ESC) button while holding down the
SHIFT button to release the priority lock mode.
The monitor number returns to the normal display on
the active monitor.
After the log-in procedure, the following operations are
available to control the system.
The operation begins with selecting a monitor, then the
selected camera appears the active monitor.
■ Monitor Selection
1. To select the desired monitor number (1 to 4), press the
numeric button.
2. Press the MON (ESC) button to execute the selection.
The MONITOR indicator on the controller will light up
and the selected monitor number will appear on the
LED display of the controller.
3. If the selected monitor number is not valid, the PROHIB-
ITED indicator lights up and the number on the LED dis-
play will blink for approximately 3 seconds.
Return to step 1 and select a new monitor number.
Note: The PROHIBITED indicator will blink if an opera-
tor with higher priority is controlling the
monitor.Control of the same monitor is denied to an
operator with lower priority.
MON LOCK
DEF ON
WIPER
DEF OFF
MON (ESC)
T&D CAM ID
MON STATUS
ALL
EVENT
ALM H VLD H SYS S
CAM (SET)
MULTI SCREEN SEL
SEQUENCE
AUX2 ONAUX2 OFF
EL-ZOOM
AUX1 ONAUX1 OFF
STILL
MONITOR SELECTION AND CAMERA SELECTION