Panasonic WJ-SX 150 Network Router User Manual


 
122
TIME-LAPSE VCR CONTROL [PANASONIC MODELS] (TERMINAL MODE)
A time-lapse VCR (Panasonic Models) is operable with the
system controller, while connecting to the matrix switcher.
Note: Before the use, it is necessary to install the
Multiplexer board in the matrix switcher, connect
the matrix switcher to the time-lapse VCR, and con-
figure the system through WJ-SX150 Administrator
Console, OSD SETUP MENU, and time-lapse VCR's
SETUP MENU. [Refer to p. 34 Installing the
Multiplexer Board, p. 45 Connection with the Time-
lapse VCR (Panasonic Models), p. 52 WJ-SX150
SETUP MENU (OSD), and p. 64 WJ-SX150 ADMIN-
ISTRATOR CONSOLE.]
The following is the procedure of a Panasonic model time-
lapse VCR.
Controlling the Time-lapse VCR
The following are the operating procedures of the time-
lapse VCR via System Controller WV-CU360C/CJ.
To Operate Multiscreen Display
The operations are the same as WJ-HD500 Series.
Refer to p.xx Multiscreen Display.
Manual Recording
The operations are the same as WJ-HD500 Series.
Refer to p.xx Manual Recording.
Normal Playback
The operations are the same as WJ-HD500 Series.
Refer to p.xx Normal Playback.
Fast-forward
1. Press the FF button to fast-forward the tape during the
stop.
2. To stop fast-forwarding, press the STOP button.
Note: Pressing the FF button during fast-forward will
start playback.
Rewind
1. During the stop, press the REW button to rewind the
tape.
2. Press the STOP button to stop rewinding.
Note: Pressing the PLAY button during rewind will start
playback.
Forward or Backward Search
The recorded images can be searched at variable speeds.
This function is available during the playback or playback
pause. (Refer to p. 117 Normal Playback.)
Move the joystick rightward or leftward to search images.
Joystick to R (B)/FF ( ): Search forward
Joystick to L (A)/REW ( ): Search backward
The joystick inclination can control the forward/backward
search speed.
During the search noise may appear on the image.
Forward or Backward Field Advance
The recorded images can be searched field by field.
During the pause, move the joystick rightward or leftward to
advance an image field by field.
Joystick to R (B)/STEP ( ): Forward field
advance
Joystick to L (A)/STEP ( ): Backward field
advance
Note: Index is unvaibable for time-lapse VCR.