Panasonic WJ-SX 150 Network Router User Manual


 
130
The alarm mode is not activated.
The alarm mode is set to OFF. Set the alarm mode to SEQUENCE or
HOLD in SETUP MENU or WJ-SX150
Administrator Console.
SETUP MENU: Refer to p. 52.
Adminstrator Console: Refer to p. 64.
The port for an alarm input is set to
OFF.
Set the alarm port to ON in SETUP
MENU or WJ-SX150 Administrator
Console.
SETUP MENU: Refer to p. 52
Administrator Console: Refer to p. 64.
When "ALM SUSPENDED" is displayed
on the monitor, the alarm is suspended.
Press the ACK/SUSPEND button while
holding down the SHIFT button to can-
cel the alarm suspension.
SETUP MENU may be open. Press the SETUP button while holding
down the SHIFT button to close SETUP
MENU.
ACK or RESET is not activated. You may not have selected the alarm-
related monitor.
Select the monitor again. (Refer to p.
90.)
The system controller is not authorized
to select the monitor.
Confirm the Monitor Selection window in
WJ-SX150 Administrator Console and
reconfigure the setting if necessary.
(Refer to p. 76.)
You are not authorized to reset an
alarm.
Confirm the Level Table window in WJ-
SX150 Administrator Console and
reconfigure the setting if necessary.
(Refer to p. 76.)
While the PROHIBITED indicator is
lighting on the system controller, you
are prohibited to control the monitor.
Open the Level Table (refer to p. 76) or
Monitor Selection window (refer to p.
76) and reconfigure the setting if neces-
sary.
Timer event is not activated.
A higher-priority operator may have
selected the event-related monitor.
Select another monitor.
SETUP MENU does not open.
When the PROHIBITED indicator is light-
ing on the system controller, you are pro-
hibited to open SETUP MENU.
Open the Level Table window (refer to
p. 76) and reconfigure the setting.
The system does not enter the record-
ing mode.
The recorder connection may be
wrong.
Connect the recommended recorder to
the unit.
The connected recorder may not con-
form to the unit.
Confirm the recorder connection (refer
to pp. 41 to 46.)
You are not authorized to operate the
recorder.
Open the Level Table window (refer to
p. 76) and reconfigure the setting.
Problem Check item Remedy