Filter
Top Products
COMSPHERE 6800 Series Network Management System
2-94 January 1997 6800-A2-GB31-20
Daily Historical Utilization (dhu)
Use the dhu command to obtain a report that displays the percent utilization of a group of
COMSPHERE 3800/3900 Series modems for each hour of the day for a specified period of time.
This report also lists the average number of calls that occurred for each hour of the day.
Information is retrieved from the call statistics summary database.
For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level: Help Desk, Data Technician, Manager, System Administrator
Abbreviation: Abbreviation: dhu
Restrictions: Only Model 3811 modems are included in the data used for calculating
results. If you specify another 3800 Series modem model number, the
results form will display a list of these modems indicating they are not
included in the results.
Routine: Yes
Schedule: Yes
Related Commands: Call Occurrence Distribution (cod)
Call Duration Distribution (cdud)
Call Detail Display (cded)
Daily Historical Utilization Input Form
This input form contains the following fields:
Device(s) (Required field)
Enter the device(s) for which call utilization statistics will be determined. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User’s/System Administrator’s Guide.
REPORT PERIOD
Enter a report period for generation of the utilization statistics report. The report will
include utilization statistics from the starting date to the ending date specified.
Date(s) included
Enter a starting date and an ending date for utilization statistics information to
be reported.
The valid format for the starting date is mm/dd/yy. The default is the previous
day’s date.
The valid format for the ending date is mm/dd/yy. The default is the previous
day’s date.