Filter
Top Products
2Modem/DSU Commands
2-2116800-A2-GB31-20 January 1997
Figure 2-64. Trending Reports Initial Input Form
This input form contains the following fields:
Trending test (Required field)
Enter the abbreviation of the command for which the trending report will be generated.
Valid entries are ant, cfr, cli, clo, cq, det, dit, eet, mbert, ot, rsl, rsq, sp.
A pop-up menu is available listing valid selections.
If cq is entered here, the following additional field appears:
CQ test group selection
Enter the desired test group.
Valid entries are 1 or 2.
Group 1 contains the following parameters:
Non-linear distortion
Receive level (not presented in graphical results)
Signal/noise ratio
Frequency offset (not presented in graphical results)
Phase jitter