Filter
Top Products
2Modem/DSU Commands
2-116800-A2-GB31-20 January 1997
Call Detail Display (cded)
Use the cded command to obtain a report that displays detailed information about COMSPHERE
3800/3900 Series modem calls. Information is retrieved from the call detail database. For each call,
this information includes the following:
• Device name of the local modem
• Device name of the remote modem (Available, only if the call was placed in Maintenance
mode)
• Connect time for the call
• Call duration
• Line speed of the call
• The reason the call disconnected
For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level: Help desk, Data Technician, Manager, System Administrator
Abbreviation: Abbreviation: cded
Restrictions: Only Model 3811 modems are included in the data used to calculate results.
If you specify another 3800 Series modem model number, the results form
will display a list of these modems indicating they are not included in the
results.
Routine: Yes
Schedule: Yes
Related Commands: Daily Historical Utilization (dhu)
Call Occurrence Distribution (cod)
Call Duration Distribution (cdud)
Call Detail Display Input Form
The Call Detail Display input form contains the following fields:
Device(s) (Required field)
Enter the device(s) for which call detail information will be displayed. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User’s/System Administrator’s Guide.
REPORT PERIOD
Enter a report period for generation of the report. The report will include call information
from the starting date to the ending date specified.