Filter
Top Products
COMSPHERE 6800 Series Network Management System
2-134 January 1997 6800-A2-GB31-20
Display [Device] Poll List (dspl)
Use the dspl command to display the poll list of a COMSPHERE 3400/4400 Series modem, a
COMSPHERE 3900 Series modem, or COMSPHERE 3600 Series DSU, a DATAPHONE II APL
modem, DSU or Shared Diagnostic Unit (SDU). Use the Acquire [Device] Poll List (acpl)
command to establish a poll list, and the Change [Device] Poll List (chpl) command to add or
delete devices to or from the poll list.
Polling is the process by which alarms from devices in the network are automatically reported to
the NMS. Once a poll list is established for a device, the device monitors everything on its poll list
for health and status.
For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level: Help Desk, Data Technician, Manager, System, Administrator
Abbreviation: dspl
Restrictions: None
Routine: Yes
Schedule: Yes
Related Commands: Acquire [Device] Poll List (acpl)
Change [Device] Poll List (chpl)
Display [Device] Poll List Input Form
This input form contains the following field:
Device(s) (Required field)
Enter the device(s) whose poll lists are to be displayed. One or more devices may be
specified. Standard addressing format applies to the input. For information on device
addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management
System User’s/System Administrator’s Guide.