Filter
Top Products
2Modem/DSU Commands
2-1316800-A2-GB31-20 January 1997
Display Line Designator (dsld)
Use the dsld command to display the line designator message stored in a COMSPHERE
3400/4400 Series APL modem. The line designator message is an alphanumeric string (up to
eight characters) which can be displayed on the front panel of a COMSPHERE APL modem.
For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level: Help Desk, Data Technician, Manager, System Administrator
Abbreviation: dsld
Restrictions: None
Routine: Yes
Schedule: Yes
Related Commands: Change Line Designator (chld)
Display Line Designator Input Form
This input form contains the following field:
Device(s) (Required field)
Enter the device(s) for which line designator messages will be displayed. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User’s/System Administrator’s Guide.