Filter
Top Products
COMSPHERE 6800 Series Network Management System
2-106 January 1997 6800-A2-GB31-20
t, T, or % Changes the current dialing method to touch-tone dialing
(default). (2296, 3400/4400, 3600)
w or W
Indicates wait up to 30 seconds for a secondary dial tone (Hayese
protocol). (3400/4400, 3600)
+ Indicates wait up to 30 seconds for a secondary dial tone (AT&T
protocol). (2296, 3400/4400, 3600)
comma Indicates wait 2 seconds. (2296, 3400/4400, 3600)
/ Reserved for future use.
k Is added to the end of the dial string; temporarily changes the
half-duplex emulation option (software option 30). (2296)
j Is added to the end of the dial string; temporarily changes the
sync/async option. (2296)
A delimiter separating telephone number and callback directory
pointer (for use with callback security). (3600)
; Reserved for future use.
- Reserved for future use.
For 3800 Series devices, you can specify a telephone number using the following
characters:
0–9 DTM for numeric dialing digits
* ,#,A,B,C,D DTMF digits
T Tone dialing
P Pulse dialing
W or + Wait for dial tone
R Reverse dial
@ Quiet answer
! Hook flash
, Pause
Disconnect immediately (for use in calling pagers)
; Return to command mode after dialing
space or - Separator for readability
() Separator for readability
You can specify a telephone directory.
The telephone number in the specified directory will be used. The format is dxx where xx
is a directory number.
• For 3600 Series DBMs and 3800 Series modems, xx=1 through 10.
• For COMSPHERE 3400/4400 Series modems with DBMs, xx=1 through 4.
• For DATAPHONE II devices, xx=1 through 99.
You can also specify that the line be disconnected without making a call. To disconnect
the line without making a call, enter q.