Filter
Top Products
2Modem/DSU Commands
2-1336800-A2-GB31-20 January 1997
Display Options (dso)
Use the dso command to display the current option settings on a COMSPHERE or DATAPHONE
II device.
For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level: Help Desk, Data Technician, Manager, System Administrator
Abbreviation: dso
Alternate: dsop
Restrictions: None
Routine: Yes
Schedule: Yes
Related Commands: Change Options (cho)
Display Options Input Form
This input form contains the following field:
Device(s) (Required field)
Enter the device(s) whose options are to be displayed. One or more devices may be
specified. Standard addressing format applies to the input. For information on device
addressing, refer to Appendix D of the COMSPHERE 6800 Series Network Management
System User’s/System Administrator’s Guide.
Display Options Results Forms
Options will vary according to the device type selected. The results forms list device information
for each specified device, and the set of options obtained from the device. See the Change Options
(cho) command description for the format of options displayed.