Filter
Top Products
2Modem/DSU Commands
2-296800-A2-GB31-20 January 1997
Call Occurrence Distribution (cod)
Use the cod command to obtain a report that displays the average number of calls that occurred for
a selected group of COMSPHERE 3800/3900 Series modems for each hour of the day over a
specified period of time. This report also includes the average number of daily calls and the total
number of calls included in the report. Information is retrieved from the call statistics summary
database.
For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.
Access Level: Help Desk, Data Technician, Manager, System Administrator
Abbreviation: cod
Restrictions: Only Model 3811 modems are included in the data used to calculate results.
If you specify another 3800 Series modem model number, the results form
will display a list of these modems indicating they are not included in the
results.
Routine: Yes
Schedule: Yes
Related Commands: Daily Historical Utilization (dhu)
Call Detail Display (cded)
Call Duration Distribution (cdud)
Call Occurrence Distribution Input Form
The Call Occurrence Distribution input form contains the following fields:
Device(s) (Required field)
Enter the device(s) for which call occurrence statistics will be determined. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User’s/System Administrator’s Guide.
REPORT PERIOD
Enter a report period for generation of the report. The report will include call statistics
from the starting date to the ending date specified.
Date(s) included
Enter a starting date and an ending date for call statistics information to be
reported.
The valid format for the starting date is mm/dd/yy. The default is the previous
day’s date.
The valid format for the ending date is mm/dd/yy. The default is the previous
day’s date.