Polycom ViewStation Network Card User Manual


 
Chapter 2 Optional Configurations
© Polycom, Inc. 95 ViewStation User Guide
Figure 2-61. Crypto Resync Pulse Screen
On this screen you can enable crypto resync, set the time between
pulses (in seconds), and set the pulse width (in milliseconds).
If the ViewStation is in a call, and it loses H.320 synchronization, it
continuously sends the resynchronization pulses at the specified
rate with the specified pulse width until H.320 regains
synchronization.
Software/Hardware
The Software/Hardware screen (System Info > Admin Setup >
Software/Hardware) is used to obtain basic information on the
software and hardware profiles of the ViewStation. For ViewStations
with multi-point capability, an additional System Options icon
appears on this screen.
Software Information
The Software screen (System Info > Admin Setup >
Software/Hardware > Software) provides the following information
about the ViewStation:
System Serial Number
BOOTUI Number
Software Version
Network Interface Type (ISDN configured ViewStations
only)