Polycom ViewStation Network Card User Manual


 
Chapter 1 Getting Started
ViewStation User Guide 16 www.polycom.com
Figure 1-10. H.323 Setup Screen
An Auto H.323 Dialing check box appears below the H.323
extension (E.164) when two or more dialing protocols are
enabled. Complete the following steps to enter information on
the H.323 Setup screen.
1. Enter a name in the H.323 name when calling this
system text box. Select a name which is easy to
remember, such as the name of a conference room.
2. Enter the H.323 extension (E.164). E.164 is a naming
scheme based on the ViewStation’s serial number and
MUST be unique to each ViewStation system.
3. Uncheck the Auto H.323 Dialing check box if displayed.
10. The Gatekeeper screen (shown in Figure 1-11) provides
terminal gateway registration, address resolutions, bandwidth,
and admission control. It is commonly used for point-to-point
Internet video calls.
A gatekeeper is not required for point-to-point Intranet video
calls. Select one of the following options for Gatekeeper:
•Off : Gatekeeper is not used.
Specify: Enter the Gatekeeper IP address.
•Auto: The ViewStation automatically searches for a
Gatekeeper on the LAN. If no Gatekeeper is used, the
ViewStation continues to search for a gatekeeper until this