Polycom ViewStation Network Card User Manual


 
Chapter 2 Optional Configurations
© Polycom, Inc. 49 ViewStation User Guide
Figure 2-18. DCP Video Numbers Screen
1. Enter the STD or area code and press the down arrow on
the remote control to continue to the next line.
2. Enter the DCP phone number used for each line.
3. When complete, highlight the Save icon and press the
SELECT button on the remote control.
Audio Quality
The Audio Quality Preference screen (System Info > Admin
Setup > Video Network > IMUX > Audio Quality) allows the
selection of an audio protocol. G.722 audio delivers a higher quality
of audio than G.728 and uses 48 Kbps of the call bandwidth. G.728
delivers telephone quality audio and only uses 16 Kbps of the call
bandwidth. G.728 is generally used for lower data rates.
To set the audio protocol, use the + and - zoom buttons on the
remote control to move the slider.
Note Changing the audio quality preferences in a call can only be
done in an H.320 call. No changes can be made while in an
H.323 call.