Polycom ViewStation Network Card User Manual


 
Chapter 2 Optional Configurations
ViewStation User Guide 74 www.polycom.com
The system is active (powered on) after a long period of
inactivity.
Authentication failure: An attempt has been made to log in as an
administrator with the wrong password.
Authentication success: The Administrator has logged in
successfully.
Call failed for reason other than a busy line.
A user has asked for help from the Technical Assistance Center.
See "Using ViewStation Help" on page 28.
The ViewStation is engaged in a video call.
A telephone or video call has disconnected.
User options on the SNMP Setup screen are:
Enable SNMP:
Checked: Enables SNMP management from an SNMP
console.
Not Checked: Disables SNMP management.
Administrator Contact Name: Enter the name of the person
responsible for remote management of the system. The default
setting is IT Administrator.
SNMP Console IP Address: Enter the IP address of the SNMP
traps sent by the ViewStation. Enter 0.0.0.0 in this field if any
SNMP management console is capable of receiving information
from the ViewStation.
Location Name: Enter the location of the ViewStation. This field
defaults to the ViewStation system name at your country name.
For example, Shellback At United States.
Community Name: Enter the SNMP management community in
which you want to enable the ViewStation. The default setting
name for this field is Public.
System Description: This field displays the type of
videoconferencing device. This field cannot be changed.