Polycom ViewStation Network Card User Manual


 
© Polycom, Inc. 1 ViewStation User Guide
1
Getting Started
This chapter explains what you need to get started, what’s in the
box, how to use the remote control, how to up the ViewStation, how
to configure the ViewStation for a specific network interface, and
how to use ViewStation help.
What You Need to Get Started
The following items are required:
A television monitor
A network connection
A power source
Additionally, the following items are required for each ViewStation as
listed below:
ViewStation H.323 — A Local Area Network (LAN) Ethernet
connection.
ViewStation H.323 with optional Quad BRI network interface
module — Up to four ISDN lines from the ISDN service provider
and an optional Ethernet LAN connection if H.323 is used.
ViewStation H.323 with optional Avaya DCP network interface
module — Up to four DCP lines from a Definity PBX. The
ViewStation DCP uses the wall jack ports connected to the
Lucent Definity PBX and an optional Ethernet LAN connection if
H.323 is used.
ViewStation 128 — An ISDN line for up to 128 Kbps video
communications and an optional Ethernet LAN connection if
H.323 is used.
ViewStation H.323 with V.35 network interface module —
Access to a Data Communications Equipment (DCE) or Data
Service Unit (DSU) and an Ethernet LAN connection if H.323 is
used.
ViewStation MP (Quad BRI or Avaya DCP with Multi-Point
calling, and up to four ISDN or DCP lines) — A software license