Chapter 1 Getting Started
© Polycom, Inc. 3 ViewStation User Guide
Using the Remote Control
The remote control packaged with the ViewStation is an integral part
of the unit. Use the remote to highlight and select icons on the
television monitor, enter alphanumeric characters in text fields,
configure the address book, move the camera, adjust the volume,
and place video calls. Remote control functionality is described on
the ViewStation QuickStart card.
Setting Up the ViewStation
Setting up the ViewStation is easy. First, locate the QuickStart card
in the ViewStation box.
The cable connectors are color-coordinated with the corresponding
connectors on the back of the ViewStation and the optional network
interface modules. To connect the ViewStation, use the QuickStart
card as a guide and follow the steps below.
QuickStart Card √ √ √ √ √ √
Read Me First Document √ √ √ √ √ √
User Documentation on CDROM √ √ √ √ √ √
Required Cables 3 3 3 3 3 3
Optional Cables 8 8 8 8 8 8
Miscellaneous Package √ √ √ √ √ √
RJ-45 Cables 4 4
V.35 Interface Adapter √
Quad BRI (IMUX) √ √
DCP Module √
Embedded 4-Port MCU √
RJ-45 White Connector Cable 1
What’s in the Box ViewStation Models
H.323 512 128 V.35 MP DCP