Chapter 4 Using the ViewStation with a PC
© Polycom, Inc. 153 ViewStation User Guide
Manual Dial: To place a video call manually, click on the Manual
Dial tab on the top of the browser screen.
1. Choose the method of call type:
• For H.323 calls: Enter the IP or DNS address of the far site
in the Video A text area.
Figure 4-18. Manual Dial Screen
• For H.320 calls: Enter the primary ISDN number in the
Video A text area. Then enter the secondary ISDN number
in the Video B text area.
2. Select the line speed used for the call.
3. Click the CALL button.
4. When a call is established, the monitor screens (as shown in
Figure 4-17) appear.
5. To disconnect a call, click on the HANG UP button.
ViewStation Web Interface Icons
The ViewStation Web interface contains a set of tools located in the
System Information and Remote Management pages of the Web
interface. These tools are used in the remote management of the
ViewStation. The following icons are the counterparts to the
ViewStation Admin Setup screen.