Polycom ViewStation Network Card User Manual


 
Chapter 3 Using the ViewStation
© Polycom, Inc., 2001 127 ViewStation User Guide
on. For more information about selecting a primary camera,
see “Video/Camera” on page 90.
Pan, Tilt, and Zoom for the ViewStation Camera
To adjust the pan or tilt of a camera, use the ARROW buttons on the
remote control.
To pan to the left, press the LEFT ARROW button.
To pan to the right, press the RIGHT ARROW button.
To tilt up, press the UP ARROW button.
To tilt down, press the DOWN ARROW button.
To zoom in, press the top (+) of the ZOOM button on the remote
control.
To zoom out, press the bottom () of the ZOOM button on the remote
control.
These adjustments comply with the Camera Direction - Reversed
option as described in “Video/Camera” section beginning on page
90.
Setting Camera Presets
The ViewStation can be set to store up to ten preset camera
positions and zoom settings for up to four near site cameras and the
main far site camera. To set a preset:
1. Use the FAR or NEAR buttons on the remote control to select
the near or far site camera.
Press the FAR button twice to display 10 preset icons for the
FAR camera.
Press the NEAR button once to display 10 preset icons for
the NEAR camera.
2. Position the camera using the ARROW buttons and the ZOOM
control on the remote control.
3. Press the SELECT button on the remote control.
The camera preset circles are displayed on the main television
monitor:
0-9 for the far camera
0-9 for the near camera