Filter
Top Products
Chapter 1 Getting Started
© Polycom, Inc. 9 ViewStation User Guide
Initial System Configuration
This section explains how to set up the ViewStation. Except where
noted, the following section applies to all ViewStation models.
Setup Common to all ViewStations
The following instructions is a set of general setup procedures which
cover all ViewStation models. Specific information that is unique to
each ViewStation model is noted.
1. Power on the television monitor and ViewStation.
2. On the Welcome screen (shown in Figure 1-2) select the
language used to display screens and information on the
ViewStation.
Figure 1-2. ViewStation Select Language Screen
3. There are two ViewStation Welcome screens. The first is the
ViewStation Select Language screen (shown in Figure 1-2)
Specify the desired country and language on this screen, and
press the SELECT button on the remote control to continue.
The main Welcome screen (shown in Figure 1-3) is a general
greeting in the language previously selected.