Filter
Top Products
A – Command Line Interface
Show Perf Command
A-74 59048-04 Rev. B
D
errors [port_number]
Displays continuous error counts for the set of 16 ports (0–15, 16–31, ...) that
include [port_number]. If you omit [port_number], ports 0–15 are displayed. Type
“q” and press the Enter key to stop the display.
Examples The following is an example of the Show Perf command:
SANbox2 #> show perf
Port Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Number (in) (out) (total) (in) (out) (total)
------ ------- ------- ------- -------- -------- --------
The following is an example of the Show Perf Byte command:
SANbox2 #> show perf byte 63
Displaying bytes/sec (total)... (Press 'q' and the ENTER key to stop display)
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
--------------------------------------------------------------------------------
0 0 0 0 0 0 0 0 31M 0 31M 0 46M 0 46M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 46M 0 46M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 46M 0 46M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
q