Q-Logic 64 Switch User Manual


 
4 – Managing Switches
Displaying Switch Information
59048-04 Rev. B 4-11
D
UserAuthentication
Enabled
Enforcement of account names and authority
Vendor Switch manufacturer
Firmware Version Active firmware version
Inactive Firmware Version Inactive firmware version
Pending Firmware Version Firmware version that will be activated at the next reset
PROM/Flasher Version PROM firmware version
MAC Address Media Access Control address
IP Address Internet Protocol address
Subnet Mask Mask that determines the IP address subnet
Gateway Gateway address
SNMP Enabled SNMP enabled or disabled.
Negotiated Domain ID The domain ID currently being used by the fabric
Configured Domain ID The domain ID defined by network administrator
Domain ID Lock Domain ID lock status. Prevents (True) or permits (False)
dynamic domain ID reassignment.
Number of Ports Number of ports activated on the switch
Switch Type Switch model
Operational State Switch operational state: Online, Offline, Diagnostic
Administrative State Current switch administrative state
Configured Admin State Switch administrative state that is stored in the switch
configuration
R_A_TOV Resource allocation timeout value
E_D_TOV Error detect timeout value
FC-SW-2 Compliant Zoning merge status. If True, changes to the active zone
set are propagated throughout the fabric. If false, changes
to both the active zone set and zoning database are
propagated throughout the fabric. Refer to the QLogic
Switch Interoperability Guide found on the QLogic Web
site.
Table 4-4. Switch Data Window Entries (Continued)
Entry Description