Filter
Top Products
C – Messages
Add a Fabric
C-2 59048-04 Rev. B
D
C.2
Add a Fabric
Table C-2. Add a Fabric Messages
Message User Action
Fabric fabricname already exists!
Or
Fabric name already in use.
Specify a name for the fabric that is not
already assigned to an existing fabric.
Invalid IP Address Verify that the IP address specified is
syntactically correctly.
The entry switch is of a type that is not
supported.
The switch hardware or firmware version
of the switch at the specified IP address is
not supported. Choose the IP address of a
different switch, or update the firmware
using Telnet or the appropriate version of
the application.
The maximum number of management
sessions on the entry switch has been
exceeded.
The application cannot establish a session
with the fabric because too many sessions
are already open. Close any other
application or Telnet sessions to the fabric
and try again.
Unable to login to switch. Reason: … Verify that the user name and password
entered in the dialog box are valid login
information for an account on the switch
specified by the IP address field.
Unknown host hostname. Verify that the host name specified for the
IP address is a valid hostname for a switch
in the fabric, and that the switch is
reachable from the user’s workstation.
Verify correct user name and password
and retry.
Either the user name or password is
incorrect. Enter the correct values and
retry.